A Beginner’s Guide to Replacing Garage Door Cables
You can expect your garage door to work with the help of the various parts that it is made of. An important part of your garage door is their cables. These garage door cables also go by the name of torsion springs. Many people get confused by this because most experts just refer to this part as a cable or a spring. If you truly look at garage door cables, you will learn that you cannot refer to the as springs unless you wound them around a shaft. You only call this part of your garage door a cable if you have not completely wound it. In short, the terms cable and spring are applicable to this part of your garage door.
If possible, you should only choose garage door cables of high quality. The use of sturdy steel wires is a sign that you have quality cables with you. No matter how you take care of your garage door, these cables can break as time goes by. The typical life expectancy of garage door cables starts at three years to seven years. The life expectancy of your cables varies on the number of times that you close and open your doors. This is one of the reasons why homeowners only close or open then when necessary.
Garage door cables can easily break when one gets broken and then the other one follows in a short time period. This is why buying these cables must come in pairs. Make sur that you also consider replacing both of these cables at the same time. The task of either installing or replacing garage door cables is going to be risky and requires a lot of work.
This task is dangerous because you will be dealing with high-tension springs. At this point, if you don’t know what tools you require and how to use them, then you are better off seeking the help of a professional. Springs are already risky parts to deal with, more so if they break.. It’s a good thing that this often happens during the closing process than the opening process. If someone is inside the garage, a loose piece of cable might endanger them. The installation of safety mechanisms is often very common on the part of the manufacturers so such a thing can be better avoided from happening.
This site will give you more information for more about replacing garage door cables yourself. The first step to replacing your cables is to measure your existing cables. Average length ranges between 7 feet and 8 feet. While it is often hard to measure broken cables, you may inquire about the length from the manufacturer itself or easily go online and check.
To install a new garage door cable, make sure to remove any existing spring. There are tools you can use to cut or unwind this spring. After removing the old spring from the shaft, you can proceed to wind your new garage door cables.